Roll Paper Is Not Securely In Contact With Roll Holder - Canon imagePROGRAF iPF6300S User Manual

Cause
The paper is loaded askew.

Roll paper is not securely in contact with roll holder.

Cause
When the roll was loaded, the roll was not in-
serted firmly all the way on the Roll Holder.
iPF6300S
For borderless printing on A1 (594 mm or 23.4 in) or A2 (420 mm or 16.5 in)
rolls, attach the included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
Select None when you have set Detect Mismatch in the Control Panel menu to
Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to con-
tinue printing. The document will be printed with a border.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder from the printer.
2. Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Loading Rolls on the Roll Holder.")
3. Load the Roll Holder in the printer.
Error Message > Messages regarding paper
Corrective Action
→P.781
Corrective Action
Roll paper is not securely in contact with roll holder.
>
→P.781
13
1061