Canon imagePROGRAF iPF6300S User Manual page 1001

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6300S:
Table of Contents

Advertisement

Replace one or both printheads in the following situations.
• If the printing quality does not improve even after one or two cycles of Head Cleaning B from the printer
menu
Replace any printheads with poor printing performance.
• If the Display Screen indicates "Open top cover and replace the left printhead."
Replace the Printhead on the left side.
• If the Display Screen indicates "Open top cover and replace the right printhead."
Replace the Printhead on the right side.
• If your Canon dealer has advised Printhead replacement
Replace the Printhead as directed.
Compatible printheads
For information on compatible printheads, see "Printhead."
Precautions when handling the Printhead
Take the following precautions when handling the Printhead.
Caution
• For safety, keep the Printhead out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.
• Do not touch the Printhead immediately after printing. The Printhead becomes extremely hot, and there is a
risk of burns.
Important
• There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during
replacement. The ink may stain clothing.
• Do not open the Printhead pouch until immediately before installation. After removing the Printhead from
the pouch, install it right away. If the Printhead is left after the pouch is opened, the nozzles may dry out,
which may affect printing quality.
Access the menu for Printhead replacement
Caution
• When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal
parts of the Printhead become hot during printing, and there is a risk of burns from touching these parts.
Important
• Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead
for replacement.
Note
• Prepare a new Ink Tank when ink levels are low.
• When the remaining capacity of Maintenance cartridge is low, prepare a new Maintenance cartridge.
1.
Remove any paper that has been advanced by selecting Eject Paper in the Control Panel menu.
• When using a roll, rewind it.
(See "Removing the Roll from the Printer.")
iPF6300S
Maintenance and Consumables
→P.980
→P.790
>
Printheads
>
Replacing the Printhead
11
983

Advertisement

Table of Contents
loading

Table of Contents