Paper Loaded Askew; Paper Not Aligned With Right Guide; Cannot Detect Papr - Canon imagePROGRAF iPF6300S User Manual

Error Message >

Paper loaded askew.

Paper loaded crooked was detected when the paper was advanced.
Important
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing prob-
lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the
back of the next document when it is printed.

Paper not aligned with right guide.

When paper was loaded, it was not aligned with the guide
13
on the right side.

Cannot detect papr

1058
The printer could not detect the paper.
Paper loaded askew.
Messages regarding paper >
Cause
Cause
Cause
Follow these steps to reload the roll.
1. Press the OK button.
2. Adjust the right edge of the roll to make it par-
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Loading Rolls on the Roll Holder.")
→P.781
Follow these steps to reload a sheet.
1. Press the OK button.
2. Pull out the sheet.
3. Load the sheet.
Follow these steps to reload the sheet.
1. Press the OK button to clear the error.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.")
Corrective Action
Reload the paper as follows.
1. Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.")
(See "Loading Rolls in the Printer.")
Corrective Action
allel to the orange Paper Alignment Line.
see "Loading Sheets in the
Feed Slot."
→P.809
Corrective Action
→P.809
→P.784
→P.784
→P.809
iPF6300S