Mediatype Mismatch; The Paper Is Too Small - Canon imagePROGRAF iPF6300S User Manual

Error Message >

MediaType Mismatch

When Detect Mismatch in the Control Panel
menu is set to Pause, the type of paper loa-
ded does not match the type specified in the
printer driver.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper
loaded does not match the type specified in
the printer driver.

The paper is too small.

When Detect Mismatch in the Control Panel
menu is set to Pause or Hold Job, paper small-
13
er than the size specified in the printer driver is
loaded.
1052
MediaType Mismatch
Messages regarding paper >
Cause
Cause
Corrective Action
Follow these steps to ensure the paper type matches on the printer and
in the printer driver.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK but-
ton.
2. Change the paper type setting in the printer driver to the type loa-
ded in the printer and try printing again.
Follow these steps to ensure the paper type matches on the printer and
in the printer driver.
1. Press ▲ or ▼ to select Change Paper, and then press the OK but-
ton.
2. Replace the loaded paper with paper of the type and size you have
specified in the printer driver.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the
printing quality.
You can continue to print, but note that this error may cause problems
in the printing results.
Corrective Action
Press ▲ or ▼ to select Print, and then press the OK button to re-
sume printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size
loaded in the printer as follows.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK but-
ton.
2. Change the paper size setting in the printer driver to the size loa-
ded in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size
setting in the printer driver as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK
button to stop printing.
2. Replace the loaded paper to match the paper width setting in the
printer driver and try printing again.
→P.5
→P.9
iPF6300S