Canon imagePROGRAF iPF6300S User Manual page 861

4.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Note
• When VacuumStrngth is set to Automatic, the setting value selected for the previous print job is
displayed (to the right of Automatic ) once you select the type of paper currently supplied.
However, the value is cleared when the printer is turned off or the paper is replaced.
5.
Press ▲ or ▼ to select VacuumStrngth, and then press the OK button.
6.
Press ▲ or ▼ to select the desired setting value, and then press the OK button.
iPF6300S
Adjustments for Better Print Quality
Adjusting the Vacuum Strength (VacuumStrngth)
> Adjusting the feed amount >
7
843