Error Message
>
Other Messages
Prepare for parts replacement. ...................................................................................................................... 1075
Unknown file. ................................................................................................................................................ 1075
Multi-sensor error .......................................................................................................................................... 1076
GARO Wxxxx (x represents a number)
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
13
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job.
The paper was not advanced because the trailing edge is ta-
1074
ped to the roll.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
GARO Wxxxx (x represents a number)
Other Messages
>
Cause
Cause
Cause
Corrective Action
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Turn off the printer and remove the roll from the printer
before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Corrective Action
Corrective Action
iPF6300S