Mac Os Settings; Configuring The Destination In Tcp/Ip Networks; Configuring The Destination For Bonjour Network; Configuring The Destination For Appletalk Networks - Canon iPF8400S User Manual

Hide thumbs Also See for iPF8400S:

Table of Contents

Mac OS Settings

Configuring the Destination in TCP/IP Networks ........................................................................................... 644

Configuring the Printer's AppleTalk Network Settings .................................................................................. 645

Configuring the Destination in TCP/IP Networks

If you use the printer in a TCP/IP network, register the printer in Print & Scan (or Print & Fax) in the Mac OS

System Preferences.

For details on how to register a printer using a TCP/IP network, see the OS User Manual.

If you use the printer in a TCP/IP network, make sure the printer's IP address is configured correctly. (See "Configuring

the IP Address Using the Printer Control Panel.")

Configuring the Destination for Bonjour Network

If you use the printer in a network that uses the Bonjour function, register the printer in Print & Scan (or Print &

Fax) in the Mac OS System Preferences.

For details on how to register a printer using Bonjour, see the OS User Manual.

Bonjour and IP Print (Auto) do not support printing to a printer on other network groups that require a router for connec-

tion. Make sure the computer and printer are on the same network. For information about network settings, ask your

network administrator.

By default, Bonjour is activated on the printer. You can activate or deactivate the Bonjour function or change the printer

name by using RemoteUI. For instructions on changing it, see "Using RemoteUI."

Configuring the Destination for AppleTalk Networks

To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination as follows.

Activating AppleTalk on the printer

By default, the AppleTalk protocol is disabled on the printer.

On the Tab Selection screen of the Control Panel, press ◀ or ▶ to

select the Settings/Adj. tab (

Press the OK button.

The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Interface Setup, and then press the OK button.

If the Tab Selection screen is not displayed, press the Menu button.

User's Guide

Show Quick Links

Table of Contents