The Printer Stops During A Print Job; An Error Message Is Shown On The Display Screen; The Printer Ejects Blank, Unprinted Paper - Canon imagePROGRAF iPF6300S User Manual

The printer stops during a print job

An error message is shown on the Display Screen ....................................................................................... 1025

The printer ejects blank, unprinted paper ...................................................................................................... 1025

An error message is shown on the Display Screen
An error message is displayed during printing.
The last portion of roll paper was used during a print job,
and paper could not be advanced because the trailing
edge is taped to the roll.
The printer ejects blank, unprinted paper
Status
The leading edge of the roll paper
was cut to straighten it.
The Printhead nozzles are clogged.
A print job was received from an
incompatible printer driver.
The printer is damaged.
iPF6300S
Status
The leading edge of rolls may be cut to straighten it if you have selected Trim
Edge First > On or Automatic in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
Print a test pattern to check the nozzles and make sure the Printhead is in good
condition for printing.
(See "Checking for Nozzle Clogging.")
Use the correct imagePROGRAF printer driver for the printer and try printing
again.
Contact your Canon dealer for assistance.
Troubleshooting > The printer stops during a print job
Corrective Action
Check the error message and take action as necessary.
(See "Error Messages.")
→P.1049
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
(See "Loading and Printing on Rolls.")
Corrective Action
→P.980
An error message is shown on the Display Screen
>
→P.790
→P.792
→P.5
→P.802
12
1025