Cannot Calibrate; Excessive Temperature Or Humidity; Please Execute Calibration; Please Calibrate Using Above Paper - Canon imagePROGRAF iPF6300S User Manual

Error Message >

Cannot calibrate.

The paper for printing a test pattern is soiled.
Otherwise, you have loaded colored paper.
The test pattern was printed too faintly.
Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.

Excessive temperature or humidity.

The temperature or humidity where
the printer is installed is out of the
acceptable range for operation.

Please execute calibration.

There is not even one color calibration execution result.
13
This is displayed when paper is loaded in the printer and "Set Exec.
Guide" is set to On on the Control Panel menu.
1066

Please calibrate using above paper.

It has become the time for prompting the execution of color calibration.
This is displayed when paper is loaded in the printer and "Set Exec. Guide"
is set to On on the Control Panel menu.
Cannot calibrate.
Messages regarding printing or adjustment
Cause
Cause
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various
environmental conditions are recommended for various types of paper. For de-
tails on the recommended environmental conditions, see the Paper Reference
Guide.
(See Paper Reference Guide .)
Press ▲ or ▼ to select Continue, and then press the OK button to continue
with color calibration. However, note that correct adjustment may not be possi-
ble.
Cause
Cause
>
Corrective Action
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide .)
Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
→P.1026
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct
sunlight or strong lighting.
Corrective Action
Execute color calibration.
(See "Using Color Calibration for Color
Adjustment.")
Set "Set Exec. Guide" to Off on the Con-
trol Panel menu.
(See "Menu Structure.")
Execute color calibration.
(See "Using Color Calibration for Col-
or Adjustment.")
Set "Set Exec. Guide" to Off on the
Control Panel menu.
(See "Menu Structure.")
Corrective Action
→P.844
→P.904
Corrective Action
→P.844
→P.904
iPF6300S