Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF6300S User Manual

3.
In the Paper Detailed Settings dialog box displayed next, select the desired settings values in
D
and Between Scans in
(See "Paper Detailed Settings Dialog Box (Mac OS X).")

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.
Automatic The roll is automatically cut by the Cutter Unit
following printer driver settings.
Eject Select this to move the cutter by key operation
and cut paper. Although there are cases with
→P.798
Automatic in which the paper falls and the pa-
per surface is scratched when the paper rubs the
Output Stacker, you can avoid damaging the pa-
per with this method since you can cut by hold-
ing the paper with your hand so that the paper
does not fall when cutting, Also, since you can
cut while visually confirming the drying of the
ink, you can avoid ejecting paper before the ink
has dried.
To cut the roll with the Cutter Unit, press the
Cut button.
Man- Choose this setting when using media that can-
not be cut using the Cutter Unit.
ual
→P.800
iPF6300S
B
Drying Time, and then click OK.
Cutting Method
Handling Paper
→P.500
Printer Setting
Media Automat- Auto Cut
Menu > ic (See
Paper "Cutting
Eject
Details > Roll Pa-
(Various per After
Types of Printing.")
Paper) >
→P.196
Cutting
Mode
Manual
Specifying the Cutting Method for Rolls
> Handling rolls >
C
Between Pages
Driver Setting
Yes
Yes
797
No Yes Print
Cut Guideline
6