Other problems
The printer does not go on ............................................................................................................................ 1043
Ink Level Detection ........................................................................................................................................ 1045
The printer does not go on
Cause
The printer is unplugged.
The specified voltage is not supplied.
The printer takes time to start up
The printer may have shut down incorrectly last time. This
may happen after power outages or if the printer is unplugged
before it is turned off.
In this case, the next time power is restored, the printer's hard
disk is checked, and startup may take some time.
iPF6300S
Plug the power cord into the outlet, and then turn on the printer.
Check the voltage of the outlet and breaker.
(See "Specifications.")
Cause
Troubleshooting
Corrective Action
→P.1078
Corrective Action
Please wait a while, because it may take several mi-
nutes to finish checking the hard disk.
If an error message is displayed after the hard disk
check, follow the instructions indicated to resolve the
problem.
>
Other problems
>
The printer does not go on
12
1043