Insufficient Paper For Job; This Paper Cannot Be Used; Roll Printing Is Selected - Canon imagePROGRAF iPF6300S User Manual

Insufficient paper for job

The printer has received a print job longer than the amount of roll paper left
when ManageRemainRoll in the Control Panel menu is On.

This paper cannot be used.

Cause
Paper that is too large for the printer has been
loaded.
Paper that is too small for the printer has been
loaded.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or noz-
zle checking.

Roll printing is selected.

Cause
You have attempted to print on a roll,
but no roll is loaded.
iPF6300S
Cause
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")
Press the OK button and load unused paper A4/Letter (vertical) or
larger. More than one sheet may be required depending on the ad-
justment.
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button.
Load the roll, and then print.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop
printing.
Error Message > Messages regarding paper
Corrective Action
Press ▲ or ▼ to select Print, and
then press the OK button to resume
printing.
However, the roll paper may run out
during the print job and you may not
be able to print all of the document.
Press ▲ or ▼ to select Change Pa-
per, and then press the OK button.
Change the Paper Source of the
printer driver, or replace the roll
with a roll that has enough paper for
the print job, and then print.
(See "Removing the Roll from the
Printer.")
→P.790
(See "Loading Rolls in the Print-
er.")
→P.784
Press ▲ or ▼ and select Stop
Printing or press the Stop button to
stop printing.
Corrective Action
→P.774
→P.774
Corrective Action
→P.781
→P.784
Insufficient paper for job
>
13
1055