Canon imagePROGRAF iPF6300S User Manual page 642

Mac OS X Software
Center of Output Paper Size
Specify Print Start Position
Note
• Select Print Area Layout or Image in Preview when you select Layout.
Roll Paper Layout
4
Upper-Left of Roll Paper
Center of Roll Paper
Note
• Select Roll Paper Preview in Preview when you select Roll Paper Layout.
• Paper Source
You can select the media source.
The following settings are available for media source.
Manual
Manual (3mm margins)
Roll Paper
Note
• When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may
• Roll Paper Options button
Click this button to open the Roll Paper Options dialog box, where you can set roll paper width and perform auto cut
624
settings.
For more information about the roll paper options, see "Roll Paper Options Dialog Box."
• Size Options
Click the Size Options button to open the Size Options dialog box and you can select a media name, size and other
settings.
For more information about the size options, see "Size Options Dialog Box."
Page Setup Sheet
> Print Plug-In for Photoshop/Digital Photo Professional
Setting
Prints the center of the image on the center of the selected Paper Size.
You can print with specifying the top and left printing start positions in From Top
Margin and From Left Margin for Paper Size.
From Top Margin
From Left Margin
Setting
Prints the top left of Media Size on the top left of the selected roll paper.
Prints the center of Media Size on the center of the selected roll paper.
Setting
Select for manual paper feed printing.
Select for manual paper feed printing when you want to minimize the margin at the
far end edge of paper.
Select to print on roll paper.
become defective depending on the paper used. If this happens, select another media source.
>
Details
Input the margin from the top of the media in numbers.
*You can input between -9999 and 9999 mm.
Input the margin from the left of the media in numbers.
*You can input between -9999 and 9999 mm.
Details
Details
→P.634
→P.633
iPF6300S