Immediate Dialing - Siemens OpenScape Voice Operating Manual

Basic functions
Step by Step
User
Configuration
Outgoing calls

Immediate dialing

Yes
Save & exit
60
Immediate dialing
Immediate dialing should only be activated if service
personnel has configured and approved a dial plan.
Immediate dialing is deactivated by default. For this rea-
son after entering the number you must either confirm
the "Dial" option or wait until the dial delay expires to set
up the connection. If Immediate dialing is configured,
your call is automatically dialed as soon as the string en-
tered matches an entry in the dial plan.
Activating or deactivating immediate dialing
z You can also configure this setting via the web interface
page 224.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.