Testing A Bluetooth Headset - Siemens OpenScape Voice Operating Manual

Bluetooth
Step by Step
Jabra BT500
Connect
Repeat dialing 123456
if nec.
218
Connecting a Bluetooth headset to OpenStage
The Bluetooth headset must now be connected to the
OpenStage 60/80.
Select the Bluetooth headset in the list.
Select and confirm the option shown in the context
menu. The connection is immediately established and
the headset is ready for operation.

Testing a Bluetooth headset

o
Press the key shown. You should now hear the on-hook
signal in the headset.
j
Enter the station number.
or In the pop-up menu:
Select and confirm the option shown. The connection is
set up as soon as your input in complete.
X
If necessary, set the call volume.
Make sure your headset port is set up properly
page 193.