Step by Step
Activating/deactivating parallel call via code
You can activate/deactivate the parallel call without hav-
ing to change to edit mode.
Prerequisite: You have already entered numbers in the
parallel call list.
^
Lift the handset.
j
Enter the code to activate or deactivate the parallel call
(see code table
Parking a call
If you have answered a call for a colleague and cannot
forward it to him, you can park the call.
Park a call
[
You are conducting the call. Let the other party know,
e.g. that you hare trying to connect him.
j
Enter the code for parking followed by a line number
(see code table
You receive a confirmation tone. The caller hears a wait-
ing melody.
]
Replace the handset
Tell your coleague that a call for him is parked and give
him the line number.
Unparking
To unpark the call, your colleague must proceed as fol-
lows:
^
Lift the handset.
j
Enter the unparking code. He is prompted to enter a
line number.
j
Enter the specified line number.
[
Your colleague is now connected with the waiting caller.
OpenScape Voice functions
page 176).
page 176).
173