Quick Search - Siemens OpenScape Voice Operating Manual

Step by Step
K

Quick search

u
Press the key as often as required until the "Corporate"
(LDAP) tab is active.
j
Enter the initial letter of the surname you need, e. g.
"K".
A single-line search window appears at the lower edge
of the display.
Do not enter any further characters. After a predefined
period of time or after pressing the
names with the corresponding initial letter are dis-
played. You can restrict the output by entering the sec-
ond and other letters. The ( key is used to switch be-
tween letters and numbers. The h key is used to
delete individual characters.
When entering extended characters you can control the
search individually. For the selection of extended char-
acters firstly press the * key.
Rule list:
Extended character Description
#
,
*
Phonebooks and call lists
i
key all available
Searches for the exact string be-
fore the extended character.
You can enter first and last name
separately using a comma. A
search is carried out for the last
name (possibly using a wildcard)
and the first first name with the
first character after the comma.
Wildcard. This searches for the
character entered and all possi-
ble subsequent characters.
145