Configuring The "Overview" Tab Display - Siemens OpenScape Voice Operating Manual

Making calls with multiple lines
Step by Step
User
Configuration
Keyset
Overview
Primary Line 1
Use FPK order
Add all lines
Save & exit
134

Configuring the "Overview" tab display

Specify here the sequence in which the individual lines
in the "Overview" tab should appear on the display.
z You can also configure this setting via the Web interface
page 224.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
All lines that are displayed in the overview (
are listed.
Select and confirm the required line (e.g. primary line).
Select one of the following options from the context
menu to move an individual line:
• Move up
• Move down
• Move to top
• Move to bottom
or
Select and confirm the option shown to arrange the
lines in the same sequence as the line keys
or
Select and confirm the option shown to display all line
keys in the overview.
The setting made for "Allow in overview"
(
Select and confirm the option shown.
page 132) is ignored here.
page 132)