Immediate Dialing - Siemens OpenStage15 Operating Manual

Step by step
User
Configuration
Outgoing calls
Immediate dialing = No
Yes
Options = Save & exit

Immediate dialing

Immediate dialing should only be activated if service
personnel has configured and approved a dial plan.
The default setting Immediate dialing is deactivated. For
this reason after entering the number you must either
confirm the "Dial" option or wait until the dial delay ex-
pires to set up the connection. If Immediate dialing is
configured, your call is automatically dialed as soon as
the string entered matches an entry in the dial plan.
Activating or deactivating immediate dialing
z You can also configure this setting via the Web interface
page 149.
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Confirm the option shown.
Basic functions
41