Lan / Nic Configuration; Configuring The Hp 2 Internal Port Sas Host Bus Adapter; Mptutil Utility - HP Integrity BL860c User's & Service Manual

Table 8 Server Blade to Enclosure Interconnect Mapping (continued)
Server Blade to c-Class Enclosure Mapping
Mezzanine Slot 2
Mezzanine Slot 3
NOTE: Dual-width interconnect modules cannot be used in slots 1 or 2.
Only single- or dual-port mezzanine cards are supported.

LAN / NIC Configuration

Table 9 shows how the EFI and HP-UX LAN ports and front panel NIC numbers match up on the
server blade enclosure.
Table 9 LAN / NIC Server Blade Enclosure Configuration
Front Panel NIC #
NIC 1
NIC 2
NIC 3
NIC 4

Configuring the HP 2 Internal Port SAS Host Bus Adapter

The following information is provided to assist you in configuring the 2 Internal Port SAS host Bus
Adapter (HBA) controller during installation.
For more information regarding SAS HBAs, see http://www.hp.com/go/integrity-iocards-docs.
To flash firmware, use the mptutil command. To configure and maintain the IR functionality of
the SAS controller on the HP Integrity server, use the drvcfg and cfggen EFI commands. If
you are scripting multiple devices, use the cfggen command.

MPTUTIL Utility

The mptutil utility enables you to update the adapter flash memory with the EFI driver and HBA
firmware. New versions of these images are released periodically.
IMPORTANT:
a SAS device and the update fails, these files are accessible.
To update firmware:
1. Insert the HP IPF Offline Diagnostics and Utilities CD in the drive and boot to the EFI Shell.
You can also download the firmware image file and update utility from the HP website at
http://www.hp.com
IMPORTANT:
in the drive to enable device mapping. The EFI utility and firmware image files are located in
the root directory or in a subdirectory on the CD.
The CD drive displays in the list of mapped devices as fs0.
2. To change to this device, enter fs0:
shell> fs0:
fs0:>
EFI LAN #
Core LAN port 1
Core LAN port 2
Core LAN port 3
Core LAN port 4
Do not store the files in this package on a SAS device. If you store these files on
in the Driver Downloads section.
When you boot the EFI enabled servers, the CD containing the utility must be
Slots 5 and 6
Slots 7 and 8
HP-UX LAN#
LAN0
LAN1
LAN2
LAN3
LAN / NIC Configuration 51