HP Integrity BL860c User's & Service Manual page 129

e. Between the outermost mezzanine 2 post and the server blade power connector cables
Figure 58 Mezzanine Slot 1 or 2 BBWC Cable Routing
5. If the controller is in mezzanine slot 3 route the cable along the following path:
a. Under the CPU 0 power pod wires
b. Along the rear of the server blade
c. Inside the mezzanine posts near the rear chassis plug
d. Outside all other mezzanine card posts
Removing and Replacing a Cache Module 129