Syntax
monarch <cpu>
Parameters
<cpu>
Operation
If specified with no parameters, monarch displays the Monarch processor for the server. Specifying
a processor number alters the preferred Monarch processor. None of these changes takes affect
until after a reboot.
Example 21 monarch Command
Shell> monarch
Current
Monarch
-------
0
0
To view monarch: fs0 :\ monarch
-----------------+-----------
current status
next boot status |
To set the monarch processor to 1: fs0 :\ monarch 1
-----------------+-----------
current status
next boot status |
pdt
Displays or clears the contents of the Page Deallocation Table.
Syntax
pdt (clear)
Parameters
<clear>
Operation
With no options specified, the command displays the PDT information for the server. The PDT is
cleared and a reboot is required for memory reallocation and safe booting.
specifies a cpu
Preferred
Monarch
Possible Warnings
---------
-----------------
0
0
| Processor
|
0
0
| Processor
|
0
1
clears the pdt
EFI/POSSE Commands
167