Determining The Ilo 2 Mp Lan Configuration Method - HP Integrity rx6600 Installation Manual

Figure 21 Server Rear Ports
iLO 2 MP RS-232 Serial Port
1
(DB-9F to DB-9F cable)
Connected to emulation
terminal device (PC, laptop,
or ASCII terminal)
General Use Serial Port
2
(Printers, etc.)
Use Table 1 1
connection method, required connection components, and connectors to the host console.
Table 1 1 Physical Connection Matrix
Connection Method
RS-232 serial port
LAN port

Determining the iLO 2 MP LAN Configuration Method

To access the iLO 2 MP through the iLO 2 MP LAN, the iLO 2 MP must acquire an IP address. The
way the iLO 2 MP acquires an IP address is dependent upon whether DHCP is enabled or disabled
on the server, and if DHCP and DNS services are available to the server. (See
scenarios.)
3
4
to determine your physical connection method.
Required Connection Components
1. Host console
2. RS-232 serial port DB-9F to DB-9F cable
3. Emulation terminal device (for example, a PC, laptop, or ASCII terminal)
10/100 LAN cable
USB 2.0 Ports
(any USB device)
iLO 2 MP LAN Port
(10/100 LAN)
VGA Port
5
No iLO 2 MP access; EFI only
Table 1 1 lists the appropriate
Table 12
Console Setup
for possible
45