Specifying Parameters; Using The Setup Utility - HP Integrity BL860c User's & Service Manual

Example 24 sysmode Command
Shell> sysmode
System Mode: NORMAL
Shell> sysmode admin
You are now in admin mode.
Shell> sysmode service
You are now in service mode.
Shell> sysmode normal
You are now in normal mode

Specifying Parameters

The following parameters can be configured for the board:
ID ( initiator ID)
Maximum data transfer rate ( rate)
Bus width
Whether the HBA is bootable (driver support)
Avoid bus resets (secondary cluster server)

Using the Setup Utility

To use the setup utility:
Specifying Parameters 169