HP Integrity BL860c User's & Service Manual page 69

| Security Configuration
|
\----------------------------------/
Use ^ and v to change option(s). Use Enter to select an option
◦ To correctly view the operating system console messages, go to the EFI Boot Manager
Menu under the EFI Boot Manager Menu.
From the Boot Configuration Menu, select Console Configuration.
The Console Configuration screen displays the current configuration of the system console.
OS might use only the primary console set via boot manager or conconfig command
/----------------------------------\
| /-----------------------------------------------------------\
| HP-UX |
| In/---| P Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600
| EF|^ | NC VGA
| iL| Ad|
| Co| Ed\-----------------------------------------------------------/
| Su| Remo
| HP| Edit O/---------------------------------------------------\
| --| AutoBo|
| Bo| BootNe| <ENTER> to enable/disable
| Sy| ------| P/p to select primary
| Se| Driver| T/t to select terminal type
| | Consol| B/b to select baud rate
\---| ------|
| System\---------------------------------------------------/
|
\-------------------------/
Use <^|v> to scroll
Select the appropriate console configuration for your environment.
NOTE: When exiting the Console Configuration screen, be sure to save your changes
and perform a server reset to activate your configuration changes.
IMPORTANT: When selecting a console as Primary, all other consoles must be set to
NC to allow the OS console messages to display to the proper device. This applies to
all operating systems.
◦ To manage the boot options list for each server, use the EFI Shell, the EFI Boot Option
Maintenance Menu, or operating system utilities.
At the EFI Shell, use the bcfg command to support list and manage the boot options list
for HP-UX.
The EFI Boot Option Maintenance Menu provides the Add a Boot Option, Delete Boot
Option(s), and Change Boot Order menu items (use this method if you must add an EFI
Shell entry to the boot options list).
Operating system utilities for managing the boot options list include the HP-UX setboot
command.
See"Adding HP-UX to the Boot Options List" (page
Autoboot Setting
The autoboot setting determines, at startup, whether a server automatically loads the first
item in the boot options list, or remains at the EFI Boot Manager Menu. With autoboot enabled,
EFI loads the first item in the boot options list after a designated timeout period.
Configure the autoboot setting for an HP Integrity server using either the autoboot EFI Shell
command, or the Set Auto Boot Time Out menu item from the EFI Boot Configuration menu.
| |
| |
|
|
|
\----------------------------------/
EFI Boot Manager ver 2.00 [14.62]
/----------------------------------\
|
Console Configuration
Acpi(HWP0002,PNP0A03,0)/Pci(4|0)
Console Help
| |
\----------------------------------/
<ENTER> to Select
1 2 1.4 GHz Active
System Overview
Console Status |
P - Primary |us
S - Secondary |ve
NC - Not Configured |ve
|
|
<ESC> or <X/x> for Previous Menu
70).
Configuring System Boot Options
|
|
|
|
|
|
|
| |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
69