Preparing for Operation
Operation Example
Output frequency
Upper limit
Lower limit
Forward
rotation/Stop
(S1)
Up command
Down command
Frequency
agreement signal
Power supply
n040
Multi-function Contact Output 1 (MA-MB-MC)
Setting range
0 to 17
n041
Multi-function Contact Output 2 (M1-M2)
Setting range
0 to 17
• The functions of multi-function contact output 1 (MA, MB, and MC) and multi-function contact output 2
(M1 and M2) can be selected from the following.
3-74
Output frequency
will reach lower
limit with input to
S5 or S6.
(S5)
(S6)
The frequency synchronization signal is ON when the run command is ON
Note:
while the Inverter is not in acceleration or deceleration mode.
Unit
Unit
Same frequency
Frequency reference reset
---
Default setting
---
Default setting
Chapter 3
0
1