Installing And Wiring Telephones And Trunks; Wiring Telephones And Trunks - Avaya S8700 Installation Instructions Manual

Installing and wiring telephones and trunks

The wiring procedures are the same for most Avaya telephones and other equipment.
This task list provides wiring examples of similar installation procedures. These are examples only;
actual wiring procedures may vary at each site.
After installing the equipment, the data for the telephone features must be administered. These
procedures are provided in the Administrator's Guide for the Avaya Communication Manager or with the
specific telephone or console.

Wiring telephones and trunks

This section includes the following wiring examples and wiring procedures:
•
Connecting telephones
•
Analog tie trunk example
•
Digital tie trunk example
•
DS1 tie trunk example
•
Auxiliary connector outputs (MCC1 and Media Gateways only)
•
Three-pair and four-pair modularity
•
Adjunct power connection locations
•
Attendant console example
•
Connecting external alarm indicators and auxiliary power
•
Connect Power Distribution Unit External Alarm Wires
•
Installing off-premises station wiring
•
Off-premises or out-of-building stations
•
Off-premises connections
•
Emergency transfer units and associated telephones
•
808A Emergency Transfer Panel and telephone installation examples
•
Installing external ringing
•
Installing the queue warning indicator
See the Job Aid entitled
pinouts.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
NOTE:
See the Installation for Adjuncts and Peripherals for Avaya Communication Manager to
install the necessary peripheral equipment.
on page 194
on page 198
on page 199
on page 200
on page 208
on page 214
on page 226
Connector and Cable Diagrams (Pinout Charts)
Installing and wiring telephones and trunks
on page 206
on page 207
on page 209
on page 211
on page 213
on page 214
on page 219
on page 227
on page 203
on page 220
for information on
193