Analog Tie Trunk Example - Avaya S8700 Installation Instructions Manual

Installing and wiring telephones and trunks
Figure 78: 2500-type analog telephone wiring
Figure notes
1 2500-Type Analog Station
Table 15: Station pinout chart
Jack Name 1
BRI-T
ADJUNCT +Vadj
DSS DTX
(QUEST)
DSS
(ISDN)
BRI-A
BRI-U
DCP
ANALOG
HANDSET

Analog tie trunk example

This example shows how to connect analog tie trunk wiring from one IP Connect or Multi-Connect
configuration to another one or any other Avaya configuration.
1
Set the option switches on the port circuit pack (such as TN760E Tie Trunk circuit pack).
2
See the Job Aid entitled
3
Install cross-connect jumpers to connect the pins from the tie trunk circuit pack to the appropriate
leads on the external tie trunk.
4
Figure 79, Analog Tie Trunk wiring,
another media gateway tie trunk. Names of the tie trunk leads must be determined from the
manufacturer or supplier of the external trunk circuit.
5
Administer on the Trunk Group screen on Avaya Site Administration (ASA). See the
Administrator's Guide for Avaya Communication Manager for more details.
198
T 2
3
R
2 3 4
+TX +RX
T0 -V GNDVoice
DRX
GND TX
TX
TIP
TIP
-TX +RX
Option Switch Settings
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
28
03
2500wire RBP 071996
2 MM711 Analog Media Module,
Position 1V301
5 6
-RX -TX
RRVoice +V
OKdig
RX -V
RX
RING
RING
-RX +TX
for detailed information.
on page 199 shows a media gateway tie trunk connected to
T.3
R.3
7 8
-V GND
S0 TTVoice
-V +V
-V GND
December 2003