Enabling Control Of Ipsis - Avaya S8700 Installation Instructions Manual

Connecting to the IP server interfaces
S8700 MC:
change system-parameters duplication
Enable Operation of PNC Duplication? y
Enable Operation of IPSI Duplication? y
S8700 IP
change system-parameters duplication
Enable Operation of IPSI Duplication? n
2
Set the
3
Press Enter to effect the changes.

Enabling control of IPSIs

1
Type
change system-parameters ipserver-interface
change system-parameters ipserver-interface
SERVER INFORMATION
Primary Control Subnet Address: 172. 22.
Secondary Control Subnet Address:
OPTIONS
IPSI Control of Port Networks: enabled
188
DUPLICATION RELATED SYSTEM PARAMETERS
DUPLICATION RELATED SYSTEM PARAMETERS
Enable Operation of IPSI Duplication?
NOTE:
Make sure the IPSIs have the same, current firmware.
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix:
Switch Identifier: A
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
field to y.
and press Enter.
0. 0
. . .
Page 1 of 1
Page 1 of 1
Page 1 of 1
December 2003