Windows 2000 Instructions; Windows 2000/Xp Instructions; Ip Address; Subnet Mask - Avaya S8700 Installation Instructions Manual

Accessing the media server

Windows 2000 instructions

1
On your desktop right-click Network Neighborhood > Properties to display the Network dialog
box.
2
In the window, select the TCP/IP that corresponds to your Ethernet card.
3
Click Properties.
4
Select Specify an IP address:
•
•
5
Click OK, OK to accept the information and close the windows.
6
Reboot the computer to effect the changes.

Windows 2000/XP instructions

1
On your desktop (under Start for XP), right-click My Network Places > Properties to display the
Network and Dial-up Connections window.
Windows 2000 should have automatically detected the Ethernet card in your system and created a
LAN connection for you. More than one connection may appear.
2
Right-click on the correct Local Area Connection > Properties to display the Local Area
Connection Properties dialog box.
3
Select Internet Protocol (TCP/IP).
4
Click Properties to display the Internet Protocol (TCP/IP) Properties dialog box.
5
On the General tab, select Use the following IP address. Enter the following:
•
•
Make a note of any IP addresses or other entries that you have to clear. You may need to restore
them later to connect to another network.
6
Select Use the following DNS server addresses. The entries for Preferred DNS server and
Alternate DNS server should both be blank.
7
Click Advanced at the bottom of the dialog box to display the Advanced TCP/IP Settings dialog
box.
8
Click the DNS tab. Make sure no DNS server is administered (the address field should be blank).
262

IP address:

192.11.13.5

Subnet Mask:

255.255.255.252
IP address:
192.11.13.5
Subnet mask:
255.255.255.252
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003