Completing the installation administration
4
Type
almenable
Verify that the SNMP alarm origination is enabled. If used, verify that alarm origination via
modem is still enabled.
5
Log off.
Enabling alarms to INADS on second server
1
Connect to the second media server
2
Repeat
page 253 on the second server.
Registering the system
Follow the existing process and procedures to register the Avaya S8700 Media Server.
Let customers know what the default LAN security settings are; they may want to change them after
installation. Make sure they are aware that if the following items are not set, they will not have remote
access to the media server:
•
telnet—no Telnet access
•
https—no Maintenance Web Interface access
•
def-sat—no SAT command access
254
and press Enter.
Telneting to media server
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
on page 253 through
Enabling alarms to INADS via SNMP
on
December 2003