Installing The Software - Avaya S8700 Installation Instructions Manual

Configuring the media server
2
Type
telnet
3
Type display
Sending only CR
then close the dialog box.
If message says
Sending both CR & LF
then continue with step 4.
4
Type
unset crlf
5
Type display
Sending only CR
6
Close the dialog box.

Installing the software

1
Type telnet 192.11.13.6 and press Enter to view the first screen.
36
and press Enter to open a Microsoft Telnet session.
and press Enter to see the current settings. If message says
and press Enter.
and press Enter to verify that the settings changed. The message should say
NOTE:
If after you open a Telnet session on the media server and you get a login prompt, you may
have a hard drive with software on it rather than a blank hard drive. If that is the case, go
to Remastering the hard drive
NOTE:
Use a telnet session to access the information on the CD.
NOTE:
To navigate on these screens, use the arrow keys to move to an option, then press the space
bar to select the option. Press Enter to submit the screen.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
on page 41 then come back to this step.
December 2003