Additional copy operations
To set the "Auto Reset Notification" function
When the automatic panel reset operation is performed, a message can be
displayed, requesting confirmation to reset the settings in Enlarge Display
mode.
In addition, it is possible to specify when the message is displayed,
requesting confirmation to reset the settings in Enlarge Display mode.
The factory default setting is "OFF".
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 5-27)
2
Touch [Auto Reset Notification] or press the [6] key in the keypad.
bizhub 750/600 (Phase 2)
5
5-45