To Set The "Extend Auto Reset" Function - Konica Minolta bizhub 200 User Manual

Additional copy operations

To set the "Extend Auto Reset" function

If no operation is performed for a specified length of time, an automatic panel
reset operation is performed and all settings in the touch panel return to their
default settings. It is possible to specify the length of time that a confirmation
screen is displayed before the settings return to their defaults.
0 For details on the automatic panel reset operation, refer to "Automatically
returning to the default settings (Automatic panel reset)" on page 2-27.
0 The factory default setting is "OFF".
1
Display the Accessibility Settings screen. (For details, refer to
page 4-14.)
2
Touch [Extend Auto Reset].
The Extend Auto Reset screen appears.
3
Select the setting for the
desired length of time
that the confirmation
screen is displayed.
– Touch [30 sec.], [60
sec.], [90 sec.] or
[120 sec.].
– To reset the settings
to their defaults with-
out displaying a con-
firmation screen,
touch [OFF].
4
Touch [Enter].
The Accessibility Settings screen appears again.
!
Detail
The operations where the machine enters Low Power mode or Sleep
mode or where the touch panel is darkened are not affected by the time
specified for the "Extend Auto Reset" function. When specifying a time
for the "Extend Auto Reset" function, specify a time shorter than that for
entering Low Power mode or Sleep mode or for darkening the touch pan-
el.
200/250/350
4
4-17