Table of Contents
Advertisement
Example: multiple line input
There are many situations in which you
can change the settings of a display or
enter data in several lines.
In this user guide symbols are used to
guide you step by step through multiple
line input. This is illustrated below using
the example of "Setting the date and
time". The things you have to do are
explained in the boxes.
You will see the following display (exam-
ple):
Date/Time
Date:
[15.11.2005]
Time:
11:11
Ý
Save
Date:
Enter day, month and year in 8-digit
format.
The second line is marked with [ ] to
show it is active.
¤
Enter the date using the digit keys.
Time:
Enter hours/minutes in 4-digit format.
¤
Press the s key.
The fourth line is marked with [ ] to show
it is active.
¤
Enter the date using the digit keys.
¤
Save changes.
¤
Press the
display key.
§Save§
¤
Then press and hold the a key.
The handset changes to idle status.
Notes on the operating instructions
PC Interface
You can connect your handset to your
computer using the supplied data cable
(page 54). Your computer can then com-
municate with your handset using a pro-
gram (free download from www.sie-
mens.com/gigasetSL555). You can access
your handset's directory and load sounds
(.mid) and screensaver pictures (.bmp)
onto the handset from your computer.
During the transfer of data between hand-
set and PC, you will see
the display. During this time, it is not pos-
sible to use the keypad and incoming calls
will be ignored.
Writing and editing a text
message
The following rules apply when writing a
text message:
Control the cursor with u v t
u
s.
u
Characters are added to the left of the
cursor.
Press the star key * to show the
u
table of special characters.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
You can call up the table of special charac-
ters when writing an SMS using the
key. Select the required character and
insert it with
.
§Insert§
Writing an SMS/name
(without predictive text)
When you press a key and hold it, the
characters of that key appear in the display
and are highlighted one after the other.
When you release the key the highlighted
character is inserted into the input field.
Press the hash key # and hold it to
switch from "Abc" mode to "123" and from
"123" to "abc" and from "abc" to "Abc"
on
Data Transfer
*
51
Advertisement
Table of Contents
