De-Registering Handsets; Registering Bluetooth Devices - Siemens Gigaset SX303isdn User Manual

Operating with other devices

De-registering handsets

i
s
Set base
s
Settings
~
OK
s
Setup user
s
De-reg. device
s
INT16: Int.16
j

Registering Bluetooth devices

The following Bluetooth devices can be registered:
GSM mobile phone
◆
Bluetooth headset
◆
Three PCs/PDAs
◆
Registering a GSM telephone and PCs/PDAs requires actions on the base station and on
the Bluetooth devices. Note the system PIN of the base station and prepare the
Bluetooth devices for registration (e.g. start PC and start software for setting up the
Bluetooth connection).
i
It is not possible to re-register a Bluetooth device that is already
registered. You need to de-register the Bluetooth device first.
Prepare base station for registration (for GSM mobile phone and
PCs/PDAs)
i
s
Bluetooth
s
Reg. BTdevice
s
GSM phone
Your base station is then ready for registration for one minute. Now register your
device. If you do not register your device within this time, the registration process is
terminated and you must prepare the base station for registration again.
126
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the handset that you wish to de-register and
OK
confirm, e.g. INT16: Int.16.
Hold down. Return to the idle state.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
A list of Bluetooth devices is displayed.
Select the desired device and confirm,
OK
e.g. GSM phone.
The display shows Registration proced.running.