Connecting Additional Devices - Siemens Gigaset SX303isdn User Manual

Underside of
base station
(enlarged view)
3.
Insert the small jack on the power cord into the socket on the base station
◆
Position cable in the cable recess
◆
Ensure that the receiver is positioned correctly on the base station!
◆
Plug the power supply unit into your power outlet.
Keep the power supply unit plugged in at all times to ensure your phone
is ready for use whenever you need it.
i
Neither the base station nor the registered handsets will operate in the
event of a power failure. However, all the settings and stored information
(messages, Phonebook entries etc.) are retained indefinitely.

Connecting additional devices

You can connect an analogue device to the Gigaset SX303isdn/SX353isdn (page 129).
You can also use the USB connection on the base station to operate a PC (page 136).
Connection for
wire-based terminal
with internal number 21
Cable recess
USB port
Preparing the base station for use
2.
Power supply unit
with power cord
Outlet
9