Forwarding An Incoming Call - Cd (Call Deflection); Transferring Calls - Siemens Gigaset SX303isdn User Manual

Forwarding an incoming call – CD (Call Deflection)
CD enables an incoming call to be diverted to any phone number while it is ringing,
without having to answer the call.
You can pre-set a divert destination (page 103), dial a phone number from the
Phonebook or enter a new number.
i
s
Forward

Transferring calls

Transferring a call externally – ECT (Explicit Call Transfer)
Preconditions:
The feature must be activated (page 137).
◆
It is only possible to transfer a call if the exchange or your ISDN PABX also supports
◆
ECT. If this is not the case, then the external call is disconnected. The number cannot
be called back.
To "hold" when making an enquiry call from an external call, Ext. enq. call must be
◆
set (page 106).
You are making an external call and would like to transfer it to another external user.
Establish an external enquiry call (page 29) and replace the receiver (before answer), to
divert the call.
With some ISDN PABX systems, your two parties are not connected
i
together when you replace the receiver when forwarding a call. In this
case you should activate this function on your ISDN PABX, if possible.
Forwarding a call to another terminal
You are making an external call and would like to transfer it to another terminal.
Establish an internal enquiry call (page 30) and replace the receiver (before answer), to
forward the call.
Open the menu.
Select the menu item and confirm.
OK
The pre-set divert destination is dialled.
Functions during a call
33