Making calls
Checking and deleting a callback
Deleting the callback while it is incoming
The base station rings and the display shows the callback number.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
DELETE
Checking or deleting the callback before it is incoming
i
s
Set base
s
Status
s
Callback
either ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
DELETE
Identify caller
Identify caller is used to identify annoying or threatening callers.
Precondition: You have applied for Identify caller with your network provider.
Activate this function during the call or immediately after the caller has hung up. You
must not end the call yourself.
You may not replace the receiver!
◆
i
To make this function easier to use, you can also set one of the
◆
function keys accordingly (page 117).
i
s
Identify caller
The caller is identified in the telephone exchange and is recorded by phone number,
time and date. A printout of the list is sent later by your network provider.
28
Press the display key. The callback function is
cancelled.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm. The status list is
OK
‰
displayed (
Select the menu item and confirm. The current
OK
callback number is shown on the screen.
Check:
Press the display key. The callback remains active.
Cancel:
Press the display key. The callback function is
cancelled.
Open the menu.
Select the menu item and confirm.
OK
= activated).