Diverting the entrance telephone externally
Calls from the entrance telephone can be diverted to an external phone number.
The internal subscribers from the entrance telephone call group are still called if an
external call diversion is set up.
The setting for the destination for external diversion, either in the exchange or in your
base station (page 103) also applies to call diversion for the entrance telephone.
Entering/changing the destination number for external call diversion
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
INT21: Int.21
s
Forw. door call
W
W
Change number
~
W
Save entry
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Select internal user and open submenu.
Select the menu item and confirm.
OK
Press the display key to display the destination
phone number. If a destination phone number has
not been recorded, the entry <empty> is shown.
Press the display key to open the submenu.
Confirm.
OK
Enter a new or changed destination phone number
and open the submenu.
Confirm.
OK
Operation of entrance telephone
143