Specifications - Siemens Gigaset SX303isdn User Manual

Appendix
Authorisation
This device is intended for the ISDN telephone connection in the UK.
Country-specific requirements have been taken into consideration.
We, Siemens Home and Office Communication Devices GmbH & Co. KG, declare that
this device meets the essential requirements and other relevant regulations laid down
in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address:
http://www.siemens.com/gigasetdocs.

Specifications

General Specifications
Feature
DECT standard
GAP standard
No. of channels
Radio frequency range
Duplex method
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Power supply/Base
ISDN connection
Environmental conditions for operation
Dialling mode
Dimensions
Weight inc. power supply unit
Length of cords
150
Value
is supported
is supported
120 duplex channels
1880–1900 MHz
time multiplex, 10 ms frame length
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
10 mW, average power per channel
up to 300 m outdoors, up to 50 m indoors
220/230 V ~/ 50 Hz
(Power supply unit C39280-Z4-C490)
Euro-ISDN-Multiple Connection IAE
+5 °C to +45 °C;
20 % to 75 % humidity
DTMF (tone dialling)/DP (dial pulsing)
Approx. 210 x 245 x 82 mm (L x W x H)
Base station approx. 970 g
Telephone connecting cord approx. 3.0 m
Mains cable approx. 1.85 m