Registering/De-Registering Handsets - Siemens Gigaset C1 User Manual

Registering/de-registering handsets

Registering/de-registering handsets
On a few bases, the registration of your Gigaset S1 handset is done automatically. You
can also register your Gigaset S1 handset manually. You must register your Gigaset SL1
handset manually.
Your handset can be registered on up to four bases.
Automatic registration: Gigaset S1 handset
On the base:
CX100isdn
To register for the first time, place the deactivated handset in the base with the display
facing upwards. Registration takes around 1 minute. The handset automatically
receives the lowest free internal number from the range Int.11 to Int.16. This will
appear in the display after registration is complete.
If all internal numbers on your phone have already been assigned for wireless terminals,
please de-register another handset you no longer require before registering a new one
(page 21).
Manual registration: Gigaset S1 and SL1
If all internal numbers on your phone have already been assigned for wireless terminals,
please de-register another handset you no longer require before registering a new one
(page 21).
You must initiate handset registration on the handset and on the base.
1. Prepare the base for registration (see operating instructions for the base).
2. On the handset (within 60 sec.)
v
s ì
s
Register H/Set
s
Base 1
~
OK
s
Int.11
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
i
The handset interrupts the base search after 60 seconds. If registration
has not been completed within this time, repeat the procedure.
20
CX150isdn SX100isdn
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e.g. Base 1.
OK
Enter the system PIN of the base (the default is 0000)
and confirm. Regstr.Procedure appears in the dis-
play along with the name of the base e.g. Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
Select internal number and confirm, e.g. Int.11 .
OK
SX150isdn