Connecting A Pc Via Usb - Siemens Gigaset SX303isdn User Manual

Operating with other devices

Connecting a PC via USB

Your base station then offers you the option of using a connected PC to :
Configure your base station
◆
Manage Phonebooks from the PC, the base station or handsets
◆
Using a PC connected by a cable or via a Gigaset M101 Data, you can also fax from the
PC (using fax emulation with no hardware requirements).
You can establish a wire-based connection to a PC via the USB port on your base station
or set up a wireless connection to one or more PCs via the Gigaset M10x Data modules.
In conjunction with the enclosed software (talk&surf 6.0), this allows you to:
Use your base station's ISDN network access for data transmission and the Internet
◆
from the PC (e.g. surfing the Internet, e-mail, home banking)
Transfer data between several PCs
◆
i
Further information can be found in the instructions for the enclosed
software (talk&surf 6.0).
Wireless PC connection: Gigaset USB adapter DECT/M105 data module
The Gigaset M101 Data with V24 interface and the Gigaset DECT/M105 USB adapter
with USB interface give you the option of establishing a wireless connection between
the base station and your PC. A connection via a Gigaset M10x Data data module
provides you with a 64 kbit/sec interface.
The internal numbers PC 41 to PC 48 on your base station are provided for this
purpose.
For installation, see the installation instructions on the CD-ROM enclosed with the data
module.
Wire-based PC connection: Base station USB port
You can establish a wire-based connection to a PC via the USB port on your base station.
A wire-based connection via the USB port on the base station provides you with a
128 kbit/sec interface.
The internal number PC 40 on your base station is provided for this purpose.
136