Table of Contents
Advertisement
Locating a handset ("paging")
You can locate your handset using the base station.
◆
Briefly press the registration/paging key on the
¢
base station (
page 1).
◆
All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: briefly press the registration/paging
key on the base station (
c
talk key
on a handset.
Registering handsets
You can register up to four handsets on your base
station (Gigaset AS18H) recommended).
Please note:
Each additional handset must be registered on
the base station in order for it to work properly!
For automatic registration of handsets to
Gigaset AS180/AS180DUO
Manual registration of handsets to Gigaset AS180/
AS180DUO
1. On the handset:
MENU
¢
¢
¢
Handset
OK
Register HS
system PIN of the base station (default is 0000)
¢
.
OK
Registering flashes in the display
2. On the base station: within 60 seconds of
entering the system PIN, press and hold the regis-
¢
tration/paging key (
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset other settings
If you have only registered handsets for other GAP-
compatible devices, these can only be de-regis-
tered with a hardware reset
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that
are registered to the same base station.
To make a call to other handsets, press
¢
~
◆
(1...4, enter internal number of the
INT
handset), the handset is called or
¢
P
◆
star key
INT
When a participant answers you can speak to
them. To end the call, press the end call key
¢
page 1) or the
¢
page 5.
¢
¢
Settings
OK
¢
¢
Enter the
OK
.
page 1) (min. 3 seconds).
¢
page 10.
¢
page 10.
, all handsets are called.
a
9
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the
The external participant hears the hold music.
◆
Before the internal participant has answered,
press the end call key
the participant who answers the call.
◆
After the internal participant has answered,
you can talk to him. Press the end call key
the call is diverted, or press the display key
you are reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal
participant can listen in on this call and take part in
the conversation (conference).
Precondition: The
activated.
Activating/deactivating listening in
¢
MENU
Settings
¢
Listening in
Internal listening in (conference)
You want to listen in to an existing external call.
Press and hold the
call. All participants hear a signal tone.
To end: press the end call key
hear a signal tone.
If the first internal participant presses the end call
a
key
, the handset that has "listened in" remains
connected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
¢
MENU
Alarm Clock
¢
‰
OK (
= on)
When activated:
¢
Set the wake-up time
When the alarm clock rings, press any key to switch
it off for 24 hours. If the alarm clock is set, the
wake-up icon
wake-up time will be displayed instead of the date.
Setting the wake-up time
¢
MENU
Alarm Clock
Enter the wake-up time in hours and minutes, then
press
.
OK
.
key and call one or all handsets.
INT
a
; the call is diverted to
function must be
Listening in
¢
¢
¢
OK
Base
OK
¢
‰
OK (
= on)
c
key. You can listen in to the
a
. All participants
¢
¢
OK
Activation
¢
OK
l
will appear on the screen and the
¢
¢
OK
Wake-up time
a
;
"
;
¢
OK
Advertisement
Table of Contents
