Activating/Deactivating Call Beats Data; Changing The Long Distance Prefix - Siemens Gigaset SX303isdn User Manual

System settings
By factory default, Internal is activated.
i
s
Set base
s
Settings
~
OK
s
System settings
s
Music on hold
s
Internal
j

Activating/deactivating Call beats data

With Call beats data you can set whether a call is rejected or signalled during data
transmission.
Call beats data Off (default):
◆
Calls received during data transmission are rejected if both B channels are being
used simultaneously. The caller will hear the busy tone.
Call beats data On:
◆
If a call is received during data transmission, the data connection is automatically
reduced to one B channel and the call is signalled.
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Call beats data

Changing the long distance prefix

Long distance prefixes are the first few digits required when dialling another city
(national) or to another country (international). In Germany, the factory default is:
0
00
In other countries, different long distance prefixes could be used. In this case you need
to change this setting.
108
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select and confirm the desired setting, e.g. Internal
OK
‰
( = on).
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
For connections to other towns (national)
For connections abroad (international)
‰
= on).