Siemens Gigaset SX303isdn User Manual page 130

Registering a GSM mobile phone on the base station
Carry out the following actions on your GSM mobile phone:
Prepare your base station for registration, see page 126.
1. Initiate registration on your GSM mobile phone, either as a "paired connection" or a
"coupled connection". For further details on your GSM mobile phone, consult the
corresponding operating instructions.
2. When prompted, enter the system PIN of the base station on the GSM mobile phone.
When registering, the base station saves either the name transferred by the GSM mobile
phone (Bluetooth device name, max. 16 characters) or the default name GSM phone.
For details of how you can change the name, see page 128. You can also change the
default ringer melody 1, see page 128.
If the Bluetooth connection is active and the Bluetooth device is within the range of the
base station, a Bluetooth symbol appears in the base station display between the date
and the time.
If the GSM mobile phone is within range, a Bluetooth connection is established
automatically; otherwise the base station regularly initiates "paging" in order to
establish a connection.
Registering a Bluetooth headset on the base station
A headset is registered on the base station:
i
s
Bluetooth
s
Reg. BTdevice
s
BT headset
~
OK
When registering, the base station saves either the name transferred by the Bluetooth
headset (Bluetooth device name, max. 16 characters) or the default name BT headset.
For details of how you can change the name, see page 128.
Registering a personal computer (PC)/PDA on the base station
A PC is automatically assigned one of the three internal numbers Int51:, Int52: or Int53:.
Prepare your base station for registration, see page 126. Carry out the following actions
on your PC/PDA:
1. Initiate the registration on your PC/PDA using the corresponding Bluetooth software:
as a "paired connection" or as a "coupled connection", specifying the necessary
service (e.g. DUN – dial-up networking). For further details on your PC/PDA, consult
the corresponding operating instructions.
2. Enter the system PIN of the base station on the PC/PDA.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
A list of Bluetooth devices is displayed.
Select the menu item and confirm. The base station
OK
searches for the Bluetooth headset.
Set the Bluetooth headset to registration mode in
accordance with the manufacturer's instructions.
Once the Bluetooth headset has been found, enter
the headset PIN and confirm.
Operating with other devices
127