Activating/Deactivating The Answering Machine; Selecting Announce Only And Am Mode - Siemens Gigaset SX303isdn User Manual

Operating the answering machine (on SX353isdn)

Activating/deactivating the answering machine

You can only activate/deactivate an answering machine when time control is not active
(page 81).
Precondition: You have selected an answering machine (page 63).
either ...
s
Activate?
or ...
s
Deactivate?
When activating, the remaining memory time (in %) is shown on the display.
Which AM mode the answering machine assumes after activation (answer and record
mode or announce only mode) depends on the announcement selected (page 64).
You can only activate an answering machine in answer and record mode if there is
memory still available. If the remaining memory is less than 60 seconds, you will be
prompted to delete old messages. When the remaining memory is less than 10 seconds,
the answering machine is started in announce only mode.
If the answering machine is activated the ö key is illuminated.

Selecting announce only and AM mode

You can activate Announcement 1, Announcement 2 or Announcem. only for each
answering machine. As supplied, the three announcements already contain standard
announcements.
When you select an announcement you also determine in which AM mode the
answering machine is to run (page 63).
Announcement 1, Announcement 2: Answer and record mode
◆
Announcem. only: announce only mode
◆
In answer and record mode a Concl.announcem is given automatically at the end of a
recording provinding you have recorded a concluding announcement (page 65).
When the phone is supplied Announcement 1 is selected. The Concl.announcem
contains nothing.
Precondition: You have selected an answering machine (page 63).
s
Announcements
s
Announcement 2
W
Select
64
Activate the answering machine:
Select the menu item and confirm.
OK
Deactivate the answering machine:
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select announcement, e.g. Announcement 2
‰
( = activated).
Press the display key to open the submenu.
Confirm. The previously set announcement is
OK
automatically deactivated.