Activating/Deactivating Automatic Pause; Locking The Answering Machine, Defining Am Pin - Siemens Gigaset SX303isdn User Manual

Setting the answering machine (on SX353isdn)

Activating/deactivating automatic pause

If automatic pause is activated the answering machine switches to pause mode after
playing back a message or memo. The next message will not be played back until you
Ð display key or the ô key.
press the
When the phone is supplied automatic pause is deactivated.
Precondition: You have selected an answering machine (page 63).
s
Settings
s
Automatic pause
j

Locking the answering machine, defining AM PIN

You can protect your answering machine against unauthorised access. To do this, define
an AM PIN (Personal Identification Number) and activate the AM- lock. The settings may
then only be changed and the messages played back after the PIN has been entered.
i
The answering machine can only be controlled remotely if you have
defined an AM PIN.
Entering and changing the AM PIN
When supplied, the AM PIN is preconfigured to 0000.
Precondition: You have selected an answering machine (page 63).
s
Settings
s
Change AM-PIN
~
OK
~
OK
If you make an error when keying in the AM PIN you can delete your entry using
the ß key and enter it again.
Activating/deactivating the AM lock
When the phone is supplied the answering machine lock is deactivated.
Precondition: You have selected an answering machine (page 63).
s
Settings
s
AM lock
80
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Hold down (back to idle status).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter new AM PIN (max. 8 digits) and confirm.
Repeat the new AM PIN and confirm.
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
‰
= activated).
‰
= activated).