Siemens Gigaset SX303isdn User Manual page 21

Preparing the base station for use
If your connection does not support this feature, you have to enter the MSNs manually.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
~
s ~
W
Save entry
The MSNs entered are automatically assigned to all registered handsets as receive
MSNs. MSN1 is automatically assigned to all handsets as the send MSN.
This procedure is repeated for MSN2 to MSN9 and for MSN0.
Set the device type:
The display shows: Set device type?
If you have connected an analogue device to your base station, select
The display shows: Set device type for Int.21?, select
Select the relevant device type and confirm with
are possible (Setting the device type, page 132).
◆ Telephone
◆ Fax
Modem
◆
Answering mach. see Page 131, Connecting an answering machine
◆
◆ Neutral
◆ Door type1
Doortype2(DTMF) see Page 140, Setting up the entrance telephone
◆
◆ Ext. music/hold
◆ No function
Briefly press the exit menu key j to continue.
Setting the receive MSN
The display shows: Set incoming MSN?
18
Press the display key to confirm the prompt.
Press the display key to confirm the MSN1 MSN %f?
prompt.
Enter name
If necessary, scroll to the line <Number> and enter
.
the MSN
numbers will already be entered.
Press the display key to open the submenu.
Select the menu item and confirm.
OK
see Page 130, Connecting telephones
see Page 130, Connecting a fax machine
see Page 130, Connecting a modem
see Page 131, Connecting a fax machine
see Page 140, Setting up the entrance telephone
see Page 131, Importing a waiting melody from an external
device
see Page 131, No device connected
.
Entering a name for an MSN is optional.
If the MSNs were found automatically, the
.
YES
(‰ = on). The following settings
OK
.
YES