Operation Of Entrance Telephone; Setting Up The Entrance Telephone - Siemens Gigaset SX303isdn User Manual

Operation of entrance telephone

Operation of entrance telephone

Setting up the entrance telephone

You can select two door types for your entrance telephone:
Door type 1:
◆
for entrance telephones with door opening via ringing current (FTZ 123) – one
ringer button.
Door type 2:
◆
for entrance telephones with DTMF control – several programmable ringer buttons
(page 140).
The following internal number is provided for setting up an entrance
telephone: Int.21
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
INT21: Int.21
s
Device type
either ...
s
Door type1
or ...
s
Doortype2(DTMF)
Setting up codes for »Door type 2 (DTMF)« entrance telephone
For entrance telephones controlled via DTMF codes, you can set up different codes.
Please refer to the corresponding information in the operating instructions for the
entrance telephone!
If you set up an internal user as door type 2, the codes are automatically activated using
presets.
i
s
Set base
s
Settings
~
OK
s
Setup user
140
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Select internal user and open
submenu.
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Select the menu item and confirm (
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
‰
= on).
‰
= on).